Logical Systems Inc.

Senior Control Systems Engineer - Canada

Canada - Aurora, ON, Canada - Full Time

Senior Control Systems Engineers analyze user requirements and the design of process and/or mechanical equipment to design automation systems that control the process or machine in the desired manner.

The engineer uses knowledge and experience in instrumentation, control valves, Motors/VFDs, control system electrical design, and PLC/DCS programming to deliver an automation system that meets the user’s needs utilizing the minimum essential design.

Senior Control Systems Engineers demonstrate:

  • high integrity,
  • a willingness to go beyond the ordinary to meet and exceed client expectations,
  • a desire for continual challenge and development,
  • excellent written and verbal communication skills, and
  • able to lead a controls engineering team.

Reports to: Operations Director

JOB RESPONSIBILITIES & QUALIFICATIONS

Responsibilities for this job may include but are not limited to:

  • Interface with customers to develop User Requirements documentation
  • Lead project teams to execute the controls hardware and/or software scope
  • Develop control specification (control narratives) documentation based on User Requirements
  • Perform initial feasibility studies for proposed projects, resulting in a feasibility-level cost estimate and supporting documentation for the project
  • Mark-up Process and Instrumentation Diagrams (P&IDs) for instrumentation and controls related changes and review drawings from the drafting team
  • Develop programs for Distributed Control Systems (DCS) and Programmable Logic Controllers (PLC) and/or oversee the program development done by others
  • Human-Machine Interface (HMI) development and SCADA configuration
  • Historian configuration
  • Develop testing plans for DCS and PLC programs to effectively test all aspects of a new program or program changes
  • Simulate the DCS/PLC program and test the system using the testing plan
  • Oversee electrical controls construction at the client’s site and verify that the system is being installed as designed – provide technical support to the construction effort
  • Perform I/O checkout on the installed control system and document the checkout results
  • Provide post-commissioning support to the client’s operations, engineering, and maintenance personnel
  • Travel to the client’s site as required

Required Experience / Abilities

  • Degreed in Engineering (Electrical, Mechanical, Chemical, or similar), Computer Science, or similar scientific/technical field

Ideal Experience

  • 10 years of experience in a similar engineering role
  • At least 5 years’ experience with one or more of the following platforms:
    • Allen Bradley PLC5, SLC500, MicroLogix, ControlLogix
    • Siemens S7, PCS7
    • Emerson DeltaV, Ovation, Provox
    • Novatech D/3
    • Honeywell Experion
    • Foxboro I/A
  • HMI/SCADA configuration experience with one or more of the following platforms:
    • Allen Bradley / Rockwell Automation
    • Inductive Automation
    • Wonderware
    • Siemens
    • iFix
    • Iconics
  • Historian and/or data analytics experience with one or more of the following platforms:
    • OSIsoft PI
    • PTC Thingworx
    • Inductive Automation Ignition
    • Aspentech
    • Rockwell Automation
    • Siemens
    • Wonderware
  • Experience in the selection, specification, and installation design of instrumentation, control valves, motors, VFDs and coordinated drive systems
  • Current working knowledge of the National Electric Code (NEC) with the ability to locate solutions to code questions
  • Licensed Professional Engineer (P.E.)
  • Experience in electrical design of Electrical Panels, I/O systems, Motor/VFD/Motion/Robotic Controls, and Ethernet-based networks
  • Field experience troubleshooting electrical controls problems in an industrial environment
  • Industry experience in Food and Beverage, Chemical, Pharma, Semiconductor, Water & Wastewater, Refining, Pulp and Paper, Oil/Gas Pipeline, Power Generation, Electrical Transmission & Distribution, Material Handling, or Packaging
  • Team Leadership and Client Relations Experience
Apply: Senior Control Systems Engineer - Canada
* Required fields
First name*
Last name*
Email address*
Location
Phone number*
Resume*

Attach resume or Paste resume

Attach resume as .pdf, .doc, .docx, .odt, .txt, or .rtf (limit 5MB) or paste resume

Paste your resume here or attach resume file

Who referred you to this position? Enter their first and last name here.
Are you legally authorized to work in Canada?*
Are you able and willing to travel to the United States for work assignments?*
Have you ever been fired or asked to resign from any job for any reason?*
Are you located within commuting distance of the work location to which you are applying (100 km)?*
Desired Salary?*
The following questions are entirely optional.
To comply with government Equal Employment Opportunity and/or Affirmative Action reporting regulations, we are requesting (but NOT requiring) that you enter this personal data. This information will not be used in connection with any employment decisions, and will be used solely as permitted by state and federal law. Your voluntary cooperation would be appreciated. Learn more.
Gender
Race/Ethnicity
Invitation for Job Applicants to Self-Identify as a U.S. Veteran
  • A “disabled veteran” is one of the following:
    • a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or
    • a person who was discharged or released from active duty because of a service-connected disability.
  • A “recently separated veteran” means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.
  • An “active duty wartime or campaign badge veteran” means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.
  • An “Armed forces service medal veteran” means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.
Veteran status
I IDENTIFY AS ONE OR MORE OF THE CLASSIFICATIONS OF PROTECTED VETERAN LISTED ABOVE
I AM NOT A PROTECTED VETERAN
I DON’T WISH TO ANSWER
Voluntary Self-Identification of Disability
Voluntary Self-Identification of Disability Form CC-305
OMB Control Number 1250-0005
Expires 05/31/2026
Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

  • Alcohol or other substance use disorder (not currently using drugs illegally)
  • Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
  • Blind or low vision
  • Cancer (past or present)
  • Cardiovascular or heart disease
  • Celiac disease
  • Cerebral palsy
  • Deaf or serious difficulty hearing
  • Diabetes
  • Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
  • Epilepsy or other seizure disorder
  • Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
  • Intellectual or developmental disability
  • Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
  • Missing limbs or partially missing limbs
  • Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
  • Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
  • Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
  • Partial or complete paralysis (any cause)
  • Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
  • Short stature (dwarfism)
  • Traumatic brain injury
Please check one of the boxes below:
YES, I HAVE A DISABILITY, OR HAVE HAD ONE IN THE PAST
NO, I DO NOT HAVE A DISABILITY AND HAVE NOT HAD ONE IN THE PAST
I DO NOT WANT TO ANSWER

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.

Name Date
Human Check*